RosenScrew
Rosen Screw
Alien Milling is a Rosen Implant Solution Certified Milling Center
Rosen Screw Is Available for All Systems
No More Loose Screws!
The Conical Head Will Lock Itself & Prevent Loosening
The Benefits Of using Rosen Screws
No More Ti-Base
Ti-Base is not needed due to the geometry of the screw head, using Ti-Base has a potential of de-bonding and loosening of the prosthesis
Can Be Tourqe By Hand Only
YES! The head geometry will lock into the screw channel and will provide locking and prevent loosening of the screw, also the screw can be torque up to 20N with any material like Resin, PMMA, Graphite and Zirconia.
Simple & Reliable
The digital Libraries of the screw allows direct connection of the prosthesis to the MUA. A true screw retained prosthesis
Cost Efficient
The Screw cost is competitive with all other conventional screws in the market.
MUA Compatibility
| Rosen 1.4mm | Rosen 1.6mm | Rosen 1.72mm | Rosen 1.4mm Straumann | Rosen SH Screw |
|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
All Trademarks are the property of their respective owners.
Share this Product
Other great brands
QUESTIONS & ANSWERS
Ask a Question-
I have patient that has a couple of implants supported gold crowns, 18 and 19, opposing natural dentition, that have become lose. Patient is in a night guard and the occlusion has been adjusted. The lab used a Nobel Active RP platform. # 18 was retorqued to factory specs in Jan and # 19 was retorqued yesterday May 11. Both are on noble conical connection RP 5mm implants. Would Rosen screws or Vortex screws be an option for this application.? Respectfully Submitted, Evan Wheeler
No Vortex is only recommended for Full Arch Hybrids.
-
What is the toque spec on this screw
According to their wesbite:
- Hand torque or max torque 20Ncm using 1.25 mm / 0.05’’Hex Drive
https://rosen-implant-solutions.com/product/x50-mua-rosen-screw-1-4mm/ -
is there a library for exocad? which digital scan post do I need?
Yes looks like Rosen Screw Website has them
https://rosen-implant-solutions.com/rosen-screw-libraries/
Looks like they sell Scan Bodies too
https://rosen-implant-solutions.com/product-category/digital-restoration/ -
Do you need a library to be imported into 3Shape to design the all on X cases ? This is going straight into the zirconium right? No ti bases on the multiunit?
Yes you will need a the library files.
They can be downloaded directly from 3Shape Control Panel under download center.
The Rosen Screws engage directly to the MUA without the need of Ti-Bases.