Alien Full Arch Builder
Build the perfect full arch case, every time.
This guided configurator walks you through every decision — material, shade, prosthesis type, MUA, screws, and finishing — so nothing gets missed and your case arrives exactly how you envisioned it.
✓Step-by-step guidance with smart branching logic
✓Live pricing as you configure
✓All case details attached to your order automatically
Step 01
Case ID
Enter the patient or case identifier for this order.
Step 02
Which arch?
Select one or both arches.
Upper Arch
Lower Arch
Step 03
What is your workflow?
How will you be sending us your case?
CAD Design Ready
I have my design files ready to upload
Digital Scan
I'll upload my intraoral scan files
Ship Physical Models
I'll mail you my models
Ship an Impression
I'll mail you my impression
Step 03B
How will you send your files?
Choose your intra-oral scanner portal or upload directly.
Step 04
Upload your files
Drag and drop your files below.
Drag & drop files here or click to browse
Step 03B
Are MUA Analogs Installed?
Are the Multi-Unit Analogs already installed in your physical models?
Yes — MUA Analogs Installed
The MUA Analogs are already placed in the physical models being shipped
No — MUA Analogs Not Installed
The models do not have MUA analogs installed
Step 03C
Select Implant System
We'll install the correct MUA Analogs before processing your models.
⚠️ Note: Since MUA analogs are not installed, please select your implant system so we can install the correct multi-unit abutments before processing.
Step 03B
Transfer Coping Type
How is the transfer coping seated in the impression?
Direct to Implant
The transfer coping connects directly to the implant fixture
—
On Multi-Unit Abutment
The transfer coping sits on top of the Multi-Unit Abutment
Step 03C
Bite Registration
Are your scans properly occluded?
Yes — Bite is Established
My scans already include proper bite registration
No — I Need a Bite Block
We'll print your scans and ship you a wax rim for bite registration
You will receive it in 3–5 days. Please record the bite, then scan the wax rim on the same printed upper and lower models, and email or ship it back.
—
Step 05
Select your material
Choose the zirconia disc for your case.
Alien HT
—
⭐ Most PopularAlien Multi-Layer 2.0
—
Alien Extreme
—
Step 06
Select shade
Choose the shade for your restoration.
Step 04B
Prosthesis type
What type of final prosthesis?
iBar
Titanium bar + zirconia hybrid
—
⭐ Most PopularAll Zirconia
Monolithic full arch
—
Step 08
File splitting
Has the iBar file already been split into separate components?
Already Split
My file is ready with separate components
Alien Milling Splits It
I need the file split into bar + zirconia
—
Step 09
MUA used
What type of Multi-Unit Abutment was used?
⭐ Most PopularStandard Nobel 4.8
DESS MUA
SRA MUA
Zest LOCATOR™
Other
Type your MUA below
Step 10
Full Arch Retainment
How will the prosthesis attach?
⭐ Most PopularScrew Direct to MUA
On Ti-Bases
—
Step 11
Screw type
Select your screw brand, model, and quantity.
DESS
—
⭐ Most PopularVortex
—
Rosen
—
S.I.N.
—
Other
Non-purchasable screws
Step 13
Finish state
How would you like your prosthesis delivered?
Green State
Pre-sintered, ready for your finishing
⭐ Most PopularSintered
Fully Sintered - Ready for Stain and Glaze
Step 14
Finishing Service
Would you like stain and glaze with pink gingival?
⭐ Most PopularStain & Glaze
With pink gingival characterization
—
No Glazing
One More Thing
Avoid Costly Remakes
Verify fit, esthetics, and phonetics before committing to your final restoration.
💡 Why order a Printed Try-In?
A printed try-in lets you confirm the fit, esthetics, and phonetics in the patient's mouth before your final zirconia is milled — saving you time, money, and the frustration of a costly remake.
⭐ Most PopularYes — Add a Printed Try-In
Confirm fit, esthetics & phonetics before final milling
—
➡️
No Thanks — Proceed to Final
Skip the try-in and go straight to final restoration
Step 15
Special instructions
Any additional notes, photos, or reference files for this case.
Reference Photos / Files (optional — max 10 files, 150MB each)
Drag & drop files or click to browse
Photos, scans, reference files — 150MB max each
Review
Order summary
Review your selections before adding to cart.
Order Summary▲